80-A66 - Spray Adhesive
Safety Data Sheet (SDS)
MATERIAL SAFETY DATA SHEET
.
1. Product and Company Identification
space
066-003
Product number Product name space Effective date space
066 Multi Purpose Adhesive Spray 6 Spray Adhesive
11-Feb-2011
space
Sprayway, Inc. 1005 S. Westgate Drive Addison, IL 60101 United States General Assistance 1-630-628-3000 pray ay, Inc. 484 Vista Ave. ddison, IL 60101 United States
Company information
space
Company phone
space
800-424-9300 703-527-3887
Emergency telephone US
space
Emergency telephone outside US
space
07
Version #
space
28-Jul-2010
Supersedes date
.
2. Hazards Identification
space
Aerosol. EXTREMELY FLAMMABLE CONTENTS UNDER PRESSURE. Will be easily ignited by heat, spark or flames. Irritating to eyes. Prolonged exposure may cause chronic effects.
Emergency overview
Potential health effects space
Skin contact. Ingestion.
Routes of exposure
space
Contact with eyes may cause irritation.
Eyes Skin
space
Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). Intentional misuse by concentrating and inhaling the product can be harmful or fatal. Prolonged inhalation may be harmful. Exposure by ingestion of an aerosol is unlikely. May cause delayed lung damage. Components of the product may be absorbed into the body by ingestion. May cause central nervous system disorder (e.g., narcosis involving a loss of coordination, weakness, fatigue, mental confusion, and blurred vision) and/or damage. May cause delayed lung damage. Prolonged skin contact may defat the skin and produce dermatitis. Central nervous system. Lungs.
space
Inhalation
space
Ingestion
space
Target organs Chronic effects space
space
Discomfort in the chest. Narcosis. Defatting of the skin. Irritation.
Signs and symptoms
.
3. Composition / Information on Ingredients
space
Components Cyclohexane
CAS #
Percent 30 - 40 15 - 20 10 - 15 10 - 15
110-82-7 106-97-8 115-10-6 74-98-6 75-28-5
n-Butane
Dimethyl Ether
Propane Isobutane
8 - 10
Non-hazardous and other components below reportable levels
10 - 20
. From the library of: Superior Sewing Machine & Supply LLC 4. First Aid Measures
space
First aid procedures
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops or persists. Immediately take off all contaminated clothing. Wash off with warm water and soap. Get medical attention if irritation develops or persists.
Eye contact
space
Skin contact
space
Move to fresh air. If symptoms persist, get medical attention.
Inhalation
Product name: 066 Multi Purpose Adhesive Spray Product #: 066-003 Revision date: 11-FEB-2011 Print date: 11-FEB-2011 66 Spray Adhesive
MSDS US 1 / 5
space
If material is ingested, immediately contact a poison control center. Have victim rinse mouth thoroughly with water. Do not induce vomiting without advice from poison control center. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Do not use mouth-to-mouth method if victim ingested the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Ingestion
space
Symptoms may be delayed.
Notes to physician
.
5. Fire Fighting Measures
space
Vapor or gas may spread to distant ignition sources and flash back. Runoff to sewer may cause fire or explosion hazard.
Flammable properties
Extinguishing media space
Foam. Dry chemical. Carbon dioxide (CO2). Do not use water jet. Water may be ineffective.
Suitable extinguishing media
Protection of firefighters space
Fire may produce irritating, corrosive and/or toxic gases.
Specific hazards arising from the chemical Protective equipment and precautions for firefighters
space
In the event of fire and/or explosion do not breathe fumes. Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, protective clothing and face mask. Containers should be cooled with water to prevent vapor pressure build up. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn.
.
6. Accidental Release Measures
space
Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Stop leak if you can do so without risk. Move the cylinder to a safe and open area if the leak is irreparable. Stop the flow of material, if this is without risk. Prevent entry into waterways, sewers, basements or confined areas. Should not be released into the environment. Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean contaminated surface thoroughly. Pressurized container: Do not pierce or burn, even after use. Do not handle or store near an open flame, heat or other sources of ignition. Do not smoke while using or until sprayed surface is thoroughly dry. Do not use if spray button is missing or defective. Use only with adequate ventilation. Do not get this material in contact with eyes. Do not get this material in contact with skin. Wear personal protective equipment. Avoid prolonged exposure. 7. Handling and Storage Level 3 Aerosol. Contents under pressure. Do not puncture, incinerate or crush. The pressure in sealed containers can increase under the influence of heat. Do not handle or store near an open flame, heat or other sources of ignition. Avoid exposure to long periods of sunlight. Store in cool place. Keep in an area equipped with sprinklers. Keep out of the reach of children. Level 3 Aerosol. Do not store, incinerate, or heat this material above 120 degrees Fahrenheit.
Methods for containment
space
Methods for cleaning up
.
space
Handling
space
Storage
.
8. Exposure Controls / Personal Protection
space
Exposure limits ACGIH Components
CAS # From the library of: Superior Sewing Machine & Supply LLC
TWA 100 ppm 1000 ppm 1000 ppm 1000 ppm
STEL Not established Not established Not established Not established
Ceiling Not established Not established Not established Not established
Cyclohexane
110-82-7 106-97-8 74-98-6 75-28-5
n-Butane Propane space Isobutane
Product name: 066 Multi Purpose Adhesive Spray Product #: 066-003 Revision date: 11-FEB-2011 Print date: 11-FEB-2011 66 Spray Adhesive
MSDS US 2 / 5
space
OSHA Components Cyclohexane
CAS #
TWA 300 ppm 1000 ppm
STEL Not established Not established
Ceiling Not established Not established
110-82-7 74-98-6
space Propane
Personal protective equipment space
Wear chemical goggles.
Eye / face protection
space
Wear appropriate chemical resistant clothing. Protective gloves.
Skin protection
space
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. If permissible levels are exceeded use NIOSH mechanical filter / organic vapor cartridge or an air-supplied respirator.
Respiratory protection
.
9. Physical & Chemical Properties
space
Compressed liquefied gas. 64.4 °F (17.8 °C) estimated
Appearance Boiling point space
space
Tan.
Color
space
0.6689 g/cm3 estimated 42.4775 kJ/g estimated
Density
space
Flammability (HOC)
space
Yes
Flash back Flash point space
-156 °F (-104.4 °C) Propellant
space
Liquid. Aerosol. Not available
Form
space
Freezing point
space
Solvent.
Odor
space
Not applicable
pH space
Liquid.
Physical state
space
55 - 75 psig @ 70F
Pressure Solubility space
None 0.669
space
Specific gravity
.
10. Chemical Stability & Reactivity Information
space
Risk of ignition.
Chemical stability Conditions to avoid space
Heat, flames and sparks.
Hazardous decomposition products No hazardous decomposition products are known. space
.
11. Toxicological Information
space
Acute LD50: 5244 mg/kg estimated, Rat, Dermal
Acute effects
space
Component analysis - LD50
Toxicology Data - Selected LD50s and LC50s 110-82-7 Cyclohexane
Inhalation LC50 Rat 13.9 mg/L 4 h; Oral LD50 Rat >5000 mg/kg; Dermal LD50 Rabbit >2000 mg/kg
Dimethyl Ether
115-10-6 75-28-5 106-97-8 74-98-6
Inhalation LC50 Rat 308.5 mg/L 4 h Inhalation LC50 Rat 658 mg/L 4 h Inhalation LC50 Rat 658 mg/L 4 h Inhalation LC50 Rat 658 mg/L 4 h
Isobutane n-Butane Propane
space
Not expected to be hazardous by OSHA criteria. Not expected to be hazardous by OSHA criteria.
Sensitization Teratogenicity space
.
12. Ecological Information From the library of: Superior Sewing Machine & Supply LLC
space
Components of this product are hazardous to aquatic life. LC50 11.98 mg/L, Fish, 96.00 Hours, IC50 1322 mg/L, Algae, 72.00 Hours,
Ecotoxicity
.
13. Disposal Considerations
space
D001: Waste Flammable material with a flash point <140 F
Waste codes
Product name: 066 Multi Purpose Adhesive Spray Product #: 066-003 Revision date: 11-FEB-2011 Print date: 11-FEB-2011 66 Spray Adhesive
MSDS US 3 / 5
space
Contents under pressure. Do not puncture, incinerate or crush. Dispose of this material and its container at hazardous or special waste collection point. Do not allow this material to drain into sewers/water supplies. If discarded, this product is considered a RCRA ignitable waste, D001. Dispose in accordance with all applicable regulations.
Disposal instructions
.
14. Transport Information
space
Department of Transportation (DOT) Requirements
Hazard class Subsidiary hazard class Proper shipping name Basic shipping requirements:
Consumer commodity ORM-D None
Packaging exceptions Packaging non bulk Packaging bulk Additional information:
156, 306 156, 306 None
space
IMDG
Hazard class UN number Proper shipping name Basic shipping requirements:
AEROSOLS 2.1 1950
Packaging exceptions Item Labels required Transport Category Additional information:
LTD QTY 5F None 2
space
IATA
Hazard class UN number Proper shipping name Basic shipping requirements:
Aerosols, flammable 2.1 1950
Packaging exceptions Labels required Additional information:
LTD QTY 2.1
.
15. Regulatory Information
space
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
US federal regulations
U.S. - CERCLA/SARA - Section 313 - Emission Reporting 110-82-7 Cyclohexane Yes Occupational Safety and Health Administration (OSHA) space 29 CFR 1910.1200 hazardous chemical
1.0 % de minimis concentration
Cyclohexane: 1000.0000 CERCLA (Superfund) reportable quantity space
No Superfund Amendments and Reauthorization Act of 1986 (SARA) space From the library of: Superior Sewing Machine & Supply LLC
Section 302 extremely hazardous substance
Section 311 hazardous chemical Yes space Hazard categories (311/312) space
Immediate Hazard - Yes Delayed Hazard - Yes Fire Hazard - Yes Pressure Hazard - Yes Reactivity Hazard - No
Product name: 066 Multi Purpose Adhesive Spray Product #: 066-003 Revision date: 11-FEB-2011 Print date: 11-FEB-2011 66 Spray Adhesive
MSDS US 4 / 5
space
Inventory status
Country(s) or region
Inventory name
On inventory (yes/no)* No No No No No
China Europe Europe Japan Korea
Inventory of Existing Chemical Substances in China (IECSC) European Inventory of New and Existing Chemicals (EINECS) European List of Notified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) Existing Chemicals List (ECL)
Yes A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory
space
State regulations
U.S. - Pennsylvania - RTK (Right to Know) List 110-82-7 Cyclohexane
Environmental hazard
Dimethyl Ether
115-10-6 75-28-5 106-97-8 74-98-6
Present Present Present Present
Isobutane n-Butane Propane
.
16. Other Information
space
HMIS® is a registered trade and service mark of the NPCA.
Further information
space
Health: 1* Flammability: 4 Physical hazard: 0
HMIS® ratings
space
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.
Disclaimer
space
Product and Company Identification: Product and Company Identification
MSDS sections updated
space
Regulatory Compliance
Prepared by
From the library of: Superior Sewing Machine & Supply LLC
Product name: 066 Multi Purpose Adhesive Spray Product #: 066-003 Revision date: 11-FEB-2011 Print date: 11-FEB-2011 66 Spray Adhesive
MSDS US 5 / 5
Made with FlippingBook Online document