A464 - M2 Moly Lubricant

US. NIOSH: Pocket Guide to Chemical Hazards

Components

Type

Value

1000 ppm 560 mg/m3

STEL

Toluene (CAS 108-88-3)

150 ppm

TWA

375 mg/m3 100 ppm

Biological limit values

ACGIH Biological Exposure Indices Value Components

Determinant

Specimen Sampling Time

Isopropyl Alcohol (CAS 67-63-0) Methylene Chloride (CAS 75-09-2) Toluene (CAS 108-88-3)

40 mg/l

Acetone

Urine

*

0.3 mg/l

Dichlorometha ne o-Cresol, with hydrolysis

Urine

*

0.3 mg/g

Creatinine in urine

*

0.03 mg/l 0.02 mg/l

Toluene Toluene

Urine Blood

* *

* - For sampling details, please see the source document. Exposure guidelines US - California OELs: Skin designation Toluene (CAS 108-88-3) US - Minnesota Haz Subs: Skin designation applies Toluene (CAS 108-88-3)

Can be absorbed through the skin.

Skin designation applies. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Appropriate engineering controls

Individual protection measures, such as personal protective equipment

If contact is likely, safety glasses with side shields are recommended.

Eye/face protection

Skin protection

Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier.

Hand protection

Use of an impervious apron is recommended.

Other

If permissible levels are exceeded use NIOSH mechanical filter / organic vapor cartridge or an air-supplied respirator.

Respiratory protection

Wear appropriate thermal protective clothing, when necessary.

Thermal hazards

Observe any medical surveillance requirements. When using do not smoke. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.

General hygiene considerations

9. Physical and chemical properties Appearance Gas. Physical state Aerosol. Form Not available. Color Not available. Odor Odor threshold Not available. pH Not available. Melting point/freezing point Not available. Initial boiling point and boiling range Not available. Flash point

-156.0 °F (-104.4 °C) PROPELLANT estimated

Not available.

Evaporation rate

Product name: M2 DRY MOLY LUBRICANT Product #: 1000015230 Version #: 01 Issue date: 08-05-2016

SDS US

4 / 11

From the Library of Superior Sewing Machine & Supply LLC