Melco EMT 10-4T

Illustrated Parts Manual for the EMT 10/4 embroidery peripheral

• A Complete Illustrated Parts Manual • Trimmer and Non-Trimmer Machines • Tubular •

Part Number 110278-01, Revision E

From the library of: Superior Sewing Machine & Supply LLC

1575 West 124th Avenue Denver, Colorado 80234 United States of America E-mail: publications@melco.com

© Copyright 1997, 1998 by Melco Embroidery Systems

ALL RIGHTS RESERVED No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) without prior written approval of Melco Embroidery Systems. Melco reserves the right to revise this publication and to make changes in it at any time without obligation of Melco to notify any person or organization of such revisions or changes. All precautions have been taken to avoid errors or misrepresentations of facts, equipment, or products. However, Melco does not assume any liability to any party for loss or damage caused by errors or omissions.

Printed in the United States of America

Revision A, April 1997 Revision B, July 1997 Revision D, January 1998 Revision E, July 1998

From the library of: Superior Sewing Machine & Supply LLC

i-i

Table Of Contents

Page

Description

Number

Covers/Table Top (1 of 4)

1-1

Covers/Table Top (2 of 4)

2-1

Covers/Table Top (3 of 4)

3-1

Covers/Table Top (4 of 4)

4-1

Keyboard Panel

5-1

Start/Stop Panel

6-1

Fluorescent Lights

7-1

Sewing Head (Head 1)

8-1

Sewing Head (Heads 2-4)

9-1

Color Change

10-1

Thread Tree

11-1

Gearbox

12-1

Needle Case (1 of 2)

13-1

Needle Case (2 of 2)

14-1

Needle Case Linear Drive

15-1

Thread Tensioner

16-1

Arm and Bed

17-1

Reciprocator

18-1

Bobbin Idler

19-1

Take-Up Drive Lever

20-1

Grabber Blade

21-1

Grabber Motor

22-1

Cutter/Picker

23-1

Trimmer Drive

24-1

X-Beam (1 of 3)

25-1

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

i-ii

Page

Description

Number

X-Beam (2 of 3)

26-1

X-Beam (3 of 3)

27-1

Y-Drive Motor

28-1

Y-Drive

29-1

Z-Drive (1 of 2)

30-1

Z-Drive (2 of 2)

31-1

Z-Drive Mount

32-1

Encoder Plate

33-1

Left Y-Carriage

34-1

Y-Idler Pulley

35-1

Right Y-Carriage

36-1

Center Y-Carriage

37-1

Electronic Cage (1 of 2)

38-1

Electronic Cage (2 of 2)

39-1

Power Supply

40-1

Motor Amplifier

41-1

AC Power Distribution

42-1

Cap Frame Mounts

43-1

Harnesses (1 of 5)

44-1

Harnesses (2 of 5)

45-1

Harnesses (3 of 5)

46-1

Harnesses (4 of 5)

47-1

Harnesses (5 of 5)

48-1

OPTIONS Melco Cap Frame

49-1

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

i-iii

Page

Description

Number

Melco Cap Frame Drive

50-1

Melco Cap Frame Gauge

51-1

Wide-Angle Cap Frame (1 of 7)

52-1

Wide-Angle Cap Frame (2 of 7)

53-1

Wide-Angle Cap Frame (3 of 7)

54-1

Wide-Angle Cap Frame (4 of 7)

55-1

Wide-Angle Cap Frame (5 of 7)

56-1

Wide-Angle Cap Frame (6 of 7)

57-1

Wide-Angle Cap Frame (7 of 7)

58-1

Wide-Angle Cap Frame Gauge

59-1

Sash Frame

60-1

Sash Hoops (21cm, 25cm)

61-1

Disk Drive

62-1

Hoop Interface

63-1

Tubular Hoops (44cm x 30cm)

64-1

Index

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

i-iv

INTRODUCTION

Model and Serial Numbers

The contents of this manual must be understood by the user to ensure that the correct part for the correct machine model is selected. Some equipment built by Melco containing the same "common" name may be identified by more than one model part number. In some cases, a different serial number sequence is also prevalent between two models of the same machine. Determine the model number of your machine before you use this manual to order parts. The machine MODEL number is located on the label that is placed on the front of the frame, under the table and to right side of the machine. Remember, although many parts are identical between the various embroidery peripheral models, this manual should only be used for identifying and ordering parts for the machines described above. How To Use This Manual The manual is divided into several sections, each containing a set of parts most common to each other, or to a function of the machine. Accompanying each section is a figure showing the general area of the machine that is represented in that section. Parts are identified with letters and numbers in these figures. Letters contained in circles generally are used to refer the user to a different figure or sec- tion of the manual that identifies the assembly with more detail. Part numbers and part identifications of the numbers inside circles are found on the pages adjacent to the figure. Figures

Item Numbers

All the numbers in circles on a diagram are listed in the first column of the parts listing accompanying that figure. Each item number in each figure is identified independently in hopes to help prevent any confusion that may occur by trying to "cross-reference" part numbers.

Part Numbers

The Melco part number is found in the second column of the parts list, directly in line with each item number from the first column.

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

i-v

Part Descriptions

Each part listed has a descriptive name in the third column of the parts listing. Hardware (such as screws, washers, etc.) are described by size in order to help the user to identify common hardware items that can be obtained by local sources if desired.

Special Parts Handling

If care is not taken in handling certain parts of the sewing head, there is a high probability that the sewing head will not function properly or the parts will fail prematurely. These parts are to have special handling considerations from the vendor, through quality control inspection, into spare parts inventories, then on to packaging for shipping, and finally to installation. Handling of these parts (and for that matter all parts), is not limited to the considerations below. Please use common sense, good judgement, and accepted handling practices in handling all parts. If you have any questions or concerns, please call your area service department. * Painted and coated surfaces need to be protected from dirt, other foreign matter, nicks, and scratches. * Non-painted and coated surfaces must not be touched by the human hand, to pre- vent corrosive body oils, dirt, and other foreign matter from contaminating the sur- faces. * Protect all bearings, bushings, cams, rails, gears, rollers, needle bars, pins, studs, connecting rods, guide shafts, and other surface finishes from dirt, other foreign matter, marring, scratches, and nicks, etc. * Bearing surfaces and shaft bore surfaces need to be thoroughly cleaned and mat- ing parts oiled before assembly. Printed Circuit Boards Printed circuit boards are packaged and shipped in anti static bags. The components of the printed circuit boards are sensitive to static electrical discharges. The use of standard anti static precautions is recommended. General Considerations

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

i-vi

Special Packaging

Several parts are packaged in specially sealed packages. These packages keep lubricant on the parts and protect them from contamination during shipment. To install these parts, clean your hands and place a small amount of sewing machine oil on your fingers to kept the integrity of the part intact.

Index

Hardware not listed can be found by identifying a related part and refering to that page.

CAUTION: When purchasing hardware from a source other than Melco, it is the user's responsibility to ensure that such hardware is of suffi- cient quality and grade to meet or exceed Melco's original equipment hardware. Melco assumes no liability for the use of inadequate hard- ware that was purchased by and/or installed by other than an autho- rized Melco factory representative.

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

i-vii

This page intentionally left blank

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

1-1

Covers/Table Top (1 of 4)

Figure 1

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

1-2

Covers/Table Top (1 of 4)

Reference Figure 1

Item Part

Item

No.

Number

Description

Comments

A B C 1 2 3 4 5 6 7 8 9

010233-01 010229-01 010258-01 010246-01 010244-03 010245-02 009458-01 006802-01 343109-01 008495-01 010171-08 003197-01 010912-01 010171-30 690427-04 690439-04 010167-04 011111-01 009561-04 010171-20 010622-02 690811-38 10835

Keyboard Disk Drive

See Page 5-1 See Page 62-1 See Page 6-1

Start/Stop Panel

Cover, Tensioner Bracket, Left

Cover, Rear, Tensioner

Cover, Tensioner Bracket, Right

Cover, Spacer, Lower Damper, Spacer Cover

Grommet, Rubber

Bushing, Insulating, Miniature

Screw, Socket Head Cap, M4 x 0.7 x 8mm, Zinc Plate

Screw, Thread Form, #8 x 1/2"

10 11 12 13 14 15 16 17 18 19 20

Cover, Grabber

Screw, Socket Head Cap, M4 x 0.7 x 30mm, Zinc Plate

Washer, Lock, Split, M4

Washer, Flat, M4

Washer, External Star, M4 Cable, Ground, 4.75”, #8

Nut, Kep, M4

Clamp, Cable, X-Axis

Screw, Socket Head Cap, M4 x 0.7 x 20mm, Zinc Plate

Bracket, Tube, Thread

Washer, Lock, Internal Star, #8

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

2-1

Covers/Table Top (2 of 4)

Figure 2

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

2-2

Covers/Table Top (2 of 4)

Reference Figure 2

Item Part

Item

No.

Number

Description

Comments

1 2 3 4 5 6 7 8 9

006848-01 010171-12 011148-01 009167-03 009859-03 009860-03 009166-04 006863-01 010604-03 690427-04 010572-04 010172-16 690427-05 690439-05 010167-04 001955-17 010954-01 010955-01 010956-01 010957-01 006672-01 010572-05 010172-12

Shelf, Half, Frame, Black

Screw, Socket Head Cap, M4 x 0.7 x 12mm, Zinc Plate

Screw, Shoulder, 10-32, Modified Cover, X-Drive Mounting, Center

Brace, Table, Left Brace, Table, Right

Cover, Y-Drive Mounting, Right

Mat, Rubber

Cover, Y-Drive Mounting, Left

10 11 12 13 14 15 16

Washer, Lock, Split, M4

Washer, Flat, M4

Screw, Socket Head Cap, M5 x 0.8 x 16mm, Zinc Plate

Washer, Lock, Split, M5

Washer, Flat, M5

Washer, External Star, #4

Ring, Retainer, External, .25” ID Shim, .020” Thick, End Y-Drive Cover Shim, .032” Thick, End Y-Drive Cover Shim, .020” Thick, Center Y-Drive Cover Shim, .032” Thick, Center Y-Drive Cover

17* 18* 19* 20* 21*

Spacer, .401” ID x .75” OD x .015” Thick, Stainless Steel

22 23

Washer, Flat, M5

Screw, Socket Head Cap, M5 x 0.8 x 12mm, Zinc Plate

Note:

*Items 17-21 are used as needed

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

3-1

Covers/Table Top (3 of 4)

Figure 3

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

3-2

Covers/Table Top (3 of 4)

Reference Figure 3

Item Part

Item

No.

Number

Description

Comments

A 1 2 3 4 5 6 7 8 9

010185-02 010008-02 010171-12 010007-03 010006-03 690427-04 690439-04 010019-01 010171-08 010496-04 010235-20

Table Tops

See Page 4-1

Cover, Left Rear Channel

Screw, Socket Head Cap, M4 x 0.7 x 12mm, Zinc Plate

Cover, Z-Drive Motor

Cover, Right Rear Channel Washer, Lock, Split, M4

Washer, Flat, M4 Guard, Z-Drive

Screw, Socket Head Cap, M4 x 0.7 x 8mm, Zinc Plate

Cover, Under Bed Plug, Hole, 1.5”

10

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

4-1

Covers/Table Top (4 of 4)

Figure 4

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

4-2

Covers/Table Top (4 of 4)

Reference Figure 4

Item Part

Item

No.

Number

Description

Comments

1 2 3 4 5 6 7 8 9

10327

Table Top, Left, Front Table Top, Center, Drive Table Top, Right, Front

009271-01

10328

010009-01 006840-01 006839-01 005340-01 006841-01 690034-03 690033-03 670038-08 009255-03 010616-03 009256-01 009157-01 010408-03

Insert, Table

Guide, Table, Insert Retainer, Table Insert

Stiffener, Insert, Table Top

Guide, Table Insert Washer, Flat, #10

10 11 12 13 14 15 16

Washer, Lock, Split, #10

Screw, Socket Head Cap, 10-32 x 1/2"

Support, Right Y-Drive Table Support, Left Y-Drive Table Support, Center X-Drive Table

Knob, Locking, 1/4-20 Tape, Adhesive, 18-7/8”

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

5-1

Keyboard Panel

Figure 5

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

5-2

Keyboard Panel

Reference Figure 5

Item Part

Item

No.

Number

Description

Comments

1* 2*

009309-02 009448-04 009561-04 010484-25 009017-02 009017-06 009017-08 009017-03 009017-04 009017-01 009017-05 009017-07 010920-01 004648-01

Panel, Keyboard

PCB, Keyboard, Assembly

3 4

Nut, Kep, M4

Standoff, M/F, M3 x 25mm Keycap, Vertical Arrow

5* 6* 7* 8* 9*

Keycap, Color Change

Keycap, Enter Keycap, Menu

Keycap, Alt

10* 11* 12*

Keycap, Horizontal Arrow

Keycap, Jog

Keycap, Fast/Slow Template, Panel

13 14 15

(domestic only)

Washer, Flat, #10, .203” ID x .443” OD x .06” Thick

11223

Knob, Extension Pot

Note:

The following can be replaced as a factory built assembly:

*010233-01 Keypad, Panel, Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

6-1

Start/Stop Panel

Figure 6

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

6-2

Start/Stop Panel

Reference Figure 6

Item Part

Item

No.

Number

Description

Comments

1* 2* 3* 4* 5* 6* 7* 8* 9*

010339-01 010338-01 010257-01 009144-01 009145-01 009143-01 009081-01 009081-02 009081-03 010159-01 010919-01

Switch, Momentary, w /Full Guard Switch, Pushbutton, Momentary Cover, Spacer, Tensioner Bracket Pushbutton, Emergency Stop Block, Contact, Emergency Stop Lens, Push Button, White, Start Lens, Push Button, Black, Stop Lens, Push Button, Gray, Frame Plate, Emergency Stop

10*

Switch, Contact Block

11

Template, Panel, Start/Stop

(domestic only)

Note:

The following can be replaced as a factory built assembly:

*010258-01 Panel, Start/Stop, Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

7-1

Fluorescent Lights

Figure 7

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

7-2

Fluorescent Lights

Reference Figure 7

Item Part

Item

No.

Number

Description

Comments

1 2 3 4 5 7 8 9

006799-01 690439-05 003573-05 011198-12 010172-16 010267-01 007059-01 340743-03 690427-05 007068-01

Bracket, Support, Light

Washer, Flat, M5

Nut, Hex, M5

Screw, Flat Head Socket, M5 x 0.8 x 12mm, Zinc Plate Screw, Socket Head Cap, M5 x 0.8 x 16mm, Zinc Plate

6*

Fixture, Set, Light, Fluorescent

Bumper, Light

Cable Clamp, 1/4”

Washer, Lock, Split, M5

10

Cable, Cord, Fluorescent Lights

Note:

The following can be replaced as a seperate item:

11171 Bulb, Fluorescent, 3 Ft.

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

8-1

Sewing Head (Head 1)

Figure 8

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

8-2

Sewing Head (Head 1)

Reference Figure 8

Item Part

Item

No.

Number

Description

Comments

A B C D 1 2 3 4 5

-------------- 010261-02 010234-01 010231-01 003136-06 006529-01 006034-21 003509-08 007526-01 005704-01 004779-01 005702-01 010171-20 690427-04 690439-04 010171-08 005707-01 009801-01 009800-01 010171-14 009802-01 010178-08 10547-08 690427-08 690439-08 690439-03 010171-20 010448-01 001935-10 10320 10322

Needle Case

See Pages 13-1 & 14-1

Thread Tensioner

See Page 16-1 See Page 10-1 See Page 11-1

Color Change

Thread Tree

Screw, Button Head Socket, M3 x 0.5 x 6mm

Set, Cover, Rotary Hook

Cover, Bed, Rear

Screw, Button Head Socket, M4 x 0.7 x 8mm

Cover, Bed, Front

6*

Tubing, .125" ID x .187" OD Key, Color Change Mount Guide, Thread, Thread Tree

7

8*

9

Screw, Socket Head Cap, M4 x 0.7 x 20mm, Zinc Plate

10 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27

Washer, Lock, Split, M4

Washer, Flat, M4

Cover, Drive, Color Change, Right Cover, Drive, Color Change, Left

Screw, Socket Head Cap, M4 x 0.7 x 8mm, Zinc Plate

Clip, Tubing

Clamp, Needle Case Linkage Shaft, Needle Case Linkage

Screw, Socket Head Cap, M4 x 0.7 x 14mm, Zinc Plate

19* 20*

Pillar, Head Support

Nut, Hex, M8 Washer, Head

Washer, Lock, Split, M8

Washer, Flat, M8 Washer, Flat, M3

Screw, Socket Head Cap, M4 x 0.7 x 20mm, Zinc Plate

Bracket, Wire Loom

(position for heads 1&3)

Screw, Flat Head Phillips, M3 x 0.5 x 10mm

Note:

The following can be replaced as a factory built assembly:

*006937-01 Tubing, Thread Tree, 24", Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

9-1

Sewing Head (Heads 2-4)

Figure 9

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

9-2

Sewing Head (Heads 2-4)

Reference Figure 9

Item Part

Item

No.

Number

Description

Comments

A B C D 1 2 3 4 5

-------------- 010261-02 010234-01 010231-01 003136-06 006529-01 006034-21 003509-08 007526-01 005704-01 005702-01 010171-20 690427-04 005707-01 009801-01 009800-01 010171-10 010171-14 010167-04 340743-02 011137-02 008129-30 010448-01 011141-01 001935-10 690439-04 690439-03

Needle Case

See Pages 13-1 & 14-1

Thread Tensioner

See Page 16-1 See Page 10-1 See Page 11-1

Color Change

Thread Tree

Screw, Button Head Socket, M3 x 0.5 x 6mm

Set, Cover, Rotary Hook

Cover, Bed, Rear

Screw, Button Head Socket, M4 x 0.7 x 8mm

Cover, Bed, Front

6* 7*

Tubing, .125" ID x .187" OD Guide, Thread, Thread Tree

8 9

Screw, Socket Head Cap, M4 x 0.7 x 20mm, Zinc Plate

Washer, Lock, Split, M4

10 11 12 13 14 15 16 17 18 19 20 21 22 23

Clip, Tubing

Clamp, Needle Case Linkage Shaft, Needle Case Linkage

Screw, Socket Head Cap, M4 x 0.7 x 10mm, Zinc Plate Screw, Socket Head Cap, M4 x 0.7 x 14mm, Zinc Plate

Washer, External Star, M4

Clamp, Cable, Nylon, 3/16” ID, Black

Cover, Rear Take-up Lever

Standoff, M/F, M4 x 0.7 x 30mm

Bracket, Wire Loom Cable, Ground, Braided

(direction for heads 2&4)

Screw, Flat Head Phillips, M3 x 0.5 x 10mm

Washer, Flat, M4 Washer, Flat, M3

Note:

The following can be replaced as a factory built assembly:

*006937-01 Tubing, Thread Tree, 24", Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

10-1

Color Change

Figure 10

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

10-2

Color Change Item Part

Reference Figure 10

Item

No.

Number

Description

Comments

1*

003504-01 005034-02 008059-01 008129-35 009411-02 670174-08 690033-36 010243-01 690034-36 000465-01 008062-01 006485-01 007574-01 008061-01 001927-08 008056-01 007573-01 008060-01 702876-08 008129-38 008129-48 005034-01

Belt, Timing, 39T, 1/5P

2

Screw, Set, Cup Point, M4 x 0.7 x 4mm Pulley, Timing, 5.08mmP, 12 Groove Standoff, Hex, M-F, M4 x 0.7 x 35mm PCB, EMT, Color Change, Assembly Screw, Pan Head Phillips, 6-32 x 1/2"

3*

4

5*

6 7

Washer, External Star, #6

8*

Housing, Drive, Color Change

9

Washer, Flat, #6 Motor, X-Y Servo

10*

11

Clamp, Split-Hub, 8mm ID Shaft, Cam, Color Change Washer, Thrust, 1.00mm Thick

12* 13* 14* 16* 17* 18* 15

Bearing, Thrust, 8mm

Screw, Set, Socket, Flat Point, M5 x 0.8 x 8mm

Cam, Color Change

Washer, Thrust, 2.75mm Thick Pulley, Timing, 5.08mmP, 16 Groove Spacer, Shaft, 5/16" ID x .016" Thick Standoff, Hex, M-F, M4 x 0.7 x 38mm Standoff, Hex, M-F, M4 x 0.7 x 48mm Screw, Set, Cup Point, M4 x 0.7 x 6mm

19 20 21 22

Note:

The following can be replaced as a factory built assembly:

*010234-01 Color Change, Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

11-1

Thread Tree

Figure 11

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

11-2

Thread Tree Item Part

Reference Figure 11

Item

No.

Number

Description

Comments

1 2 3 4 5 6 7 8 9

005703-02 005701-01 006349-01 006348-01 690439-05 690427-05 010172-12 006798-02 010603-01 010571-01 010171-20 010171-16 690427-04 690439-04 010172-12

Tube, Guide, Thread, Thread Tree, 9.7”

Seat, Cone, Thread, Thread Tree

Pad, Thread Tree Plate, Thread Spool Washer, Flat, M5

Washer, Lock, Split, M5

Screw, Socket Head Cap, M5 x 0.8 x 12mm, Zinc Plate

Bracket, Front, Thread Tree Bracket, Rear, Thread Tree

10 11 12 13 14 15

Brace, Thread Tree

Screw, Socket Head Cap, M4 x 0.7 x 20mm, Zinc Plate Screw, Socket Head Cap, M4 x 0.7 x 16mm, Zinc Plate

Washer, Lock, Split, M4

Washer, Flat, M4

Screw, Socket Head Cap, M5 x 0.8 x 12mm, Zinc Plate

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

12-1

Gearbox

Figure 12

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

12-2

Gearbox

Reference Figure 12

Item Part

Item

No.

Number

Description

Comments

1* 2* 3*

004234-21 003195-01 002668-01 004945-01 670038-10 010171-16 342630-01 001971-06 693155-15 004263-21 003199-01 004258-12

Gearbox, Assembly, PHII, Grey

Assembly, Gears, Bevel Collar, Support, Gear Bearing, Thrust, 15mm

4 5 6 7 8 9

Screw, Socket Head Cap, 10-32 x 5/8"

Screw, Socket Head Cap, M4 x 0.7 x 16mm, Zinc Plate

Collar, Shaft, 15mm ID

Screw, Set, Flat Point, M6 x 1.00 x 6mm

Washer, Thrust, 15mm

10 11 12

Cover, Gearbox

Bearing, Gear, Main Shaft Pin, Dowel, .1875" OD x .75"

Note:

The following can be replaced as a factory built assembly:

*006043-21 Gear, Case, Assembly, Grey

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

13-1

Needle Case (1 of 2)

Figure 13

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

13-2

Needle Case (1 of 2)

Reference Figure 13

Item Part

Item

No.

Number

Description

Comments

1 2 3 4 6 7 8 9

007511-01 010171-06 007510-02 011162-08 008483-01 007519-01 007503-01 001924-06 001935-06 008482-01 007528-01 007527-01 010171-16 006347-01 010167-04 010171-06 011141-01

Cover, Needle Case, Lower

Screw, Socket Head Cap, M4 x 0.7 x 6mm, Zinc Plate

Cover, Needle Case, Upper

Screw, Button Head Cap, M4 x 0.7 x 8mm, Zinc Plate

5*

Guide, Thread, Lower, w /Eyelet, Assembly

Spring, Thread, Retaining Plate, Guide, Needle Bar

Screw, Cheese Head, Slotted, M4 x 0.7 x 6mm Screw, Flat Head Phillips, M3 x 0.5 x 6mm Guide, Thread, Middle, w /Eyelet, Assembly

10 11 12 13 14 15 16 17

Support, Tensioner Bracket Magnet, Thread, Retaining

Screw, Socket Head Cap, M4 x 0.7 x 16mm, Zinc Plate

Blade, Sensor, Interruptor

(Head 4 Only)

Washer, Lock, External Star, M4

Screw, Socket Head Cap, M4 x 0.7 x 6mm, Zinc Plate

Cable, Ground, Braided

(Head 2 only)

Note:

*Includes items 4 and 6

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

14-1

Needle Case (2 of 2)

Figure 14

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

14-2

Needle Case (2 of 2)

Reference Figure 14

Item Part

Item

No.

Number

Description

Comments

1 2 3 4 5 6 7 8 9

001828-01 001528-01 007591-01 007924-01 001535-01 010170-08 010170-10 001840-01 005577-01 007408-01 007505-01 007506-01 005009-01 001537-01 001532-01 002637-08 702876-05 702876-08 010360-01 007504-01 007501-01 008474-01 002884-01 010171-20 671855-08 008472-01 007518-01 010171-06 700837-01 700837-02 700837-03 662744-08 008471-01 001960-06 10207

Screw, Set, Needle Clamp

Clamp, Needle

Damper, Needle Clamp Foot, Presser, Assembly Spring, Presser Foot

Screw, Socket Head Cap, M3 x 0.5 x 8mm, Zinc Plate Screw, Socket Head Cap, M3 x 0.5 x 10mm, Zinc Plate

Clamp, Stop, Needle Bar Damper, Needle Case

10 11 12 13 14 15 16 18 19 20 21 23 24 25

Stud, Connecting, Needle Bar

Shim, Needle Case Felt, Needle Case

Washer, Flat, .260" ID x .420" OD x .03" Thick

Spring, Holding, Needle Bar

Bar, Needle

Screw, Socket Head Cap, Low Head, M5 x 0.8 x 8mm Spacer, Precision, .313" ID x .010" Thick (Use as Required) Spacer, Precision, .313" ID x .016" Thick (Use as Required)

17a 17b

Lever, Take-Up, Assembly

Rail, Guide, Lower Shaft, Take-Up Lever

Case, 10 Needle

22•

Bracket, Grabber, Lower, Flared

Spacer, Support, Velcro

Screw, Socket Head Cap, M4 x 0.7 x 20mm, Zinc Plate

Screw, Pan Head Slotted, M3 x 0.5 x 8mm

26*

Bar, Grabber

27 28

Spacer, Shaft, Take-Up Lever

Screw, Socket Head Cap, M3 x 0.5 x 6mm, Zinc Plate

29a 29b 29c

Spacer, Shaft, 1/4" ID x .002" Thick Spacer, Shaft, 1/4" ID x .004" Thick Spacer, Shaft, 1/4" ID x .006" Thick

(Use as Required) (Use as Required) (Use as Required)

30

Pin, Dowel, .25" OD x .50" Velcro, Wiper, Pile, Flared

31*•

32

Screw, Set, Flat Point, M4 x 0.7 x 6mm

Note:

The following can be replaced as a factory built assembly:

*008470-01 Grabber Bar, Upper, Flared, Assembly •008473-01 Grabber Bracket, Lower, Flared, Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

15-1

Needle Case Linear Drive

Figure 15

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

15-2

Needle Case Linear Drive

Reference Figure 15

Item Part

Item

No.

Number

Description

Comments

1 2

010171-16 -------------- 010700-01 007516-01 007517-01 007562-06 007520-01 010171-12 010171-06 007546-01 007507-01 671855-06 007473-01 003509-08 007514-01 007521-01 002610-14 007522-01 001942-01 002821-01

Screw, Socket Head Cap, M4 x 0.7 x 16mm, Zinc Plate

Needle Case

See Pages 13-1 & 14-1

3* 4*

Plate, Bearing, Retainer

Stud, Retainer

5 6 7 8 9

Bearing, Radial, 4mm ID x 9mm OD

Ring, Retaining

V-Rail, Needle Case

Screw, Socket Head Cap, M4 x 0.7 x 12mm, Zinc Plate Screw, Socket Head Cap, M4 x 0.7 x 6mm, Zinc Plate

10 11 12 13 14 15 16 17 18 19 20

Bracket, Support, Take-Up Lever Guide

Rail, Guide, Take-Up Lever

Screw, Pan Head Slotted, M3 x 0.5 x 6mm

Cover, Front, Arm, Right

Screw, Button Head Socket, M4 x 0.7 x 8mm

Cover, Front, Arm, Left

V-Rail, Arm

Pin, Spring, 3mm Bearing, Cross Roller

Plate, Position, Machined

Pad, Resevoir, Felt

Note:

The following can be replaced as a factory built assembly:

*007558-01 Plate, Retainer, Bearing, Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

16-1

Thread Tensioner

Figure 16

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

16-2

Thread Tensioner

Reference Figure 16

Item Part

Item

No.

Number

Description

Comments

1• 2• 3• 4• 5# 6# 7# 8#

007080-01 003654-01 005137-01 007531-01 007524-01 009401-01 009415-04 001924-06 010171-20 005196-01 004854-01 005422-01 005197-01 003560-01 005198-02 005198-01 006474-01 004908-01 004897-01 007559-01 007529-01 001922-10 010373-01 008481-01 003509-06 002897-01 007659-02 008468-01 010568-01 690034-32 010577-02 010620-01 001924-10 010917-01 011351-01 009317-01 009863-10

Knob, Adjust, Pretensioner, Plastic

Spring, Pretensioner Disk, Pretensioner Post, Pretensioner Bracket, Pretensioner Bracket, Tensioner

PCB, Thread Break, Assembly

Screw, Cheese Head, Slotted, M4 x 0.7 x 6mm Screw, Socket Head Cap, M4 x 0.7 x 20mm, Zinc Plate

9

10* 11* 12* 13* 14# 15* 16* 17* 18* 19* 20* 21# 22# 23# 24# 25# 26# 28# 29# 30# 31# 32# 27

Base, Tensioner

Spring, Tensioner, Thread

Cap, Spring

Knob, Tensioner, Black, Assembly

Tab, Tensioner

Pad, Felt, .095" Thick Pad, Felt, .065" Thick

Disk, Tensioner, Thread, Assembly

Disk, Plastic

Post, Tensioner

Spring, Check, Tensioner, Thread

Collar, Tensioner, Assembly

Screw, Socket Head Cap, M3 x 0.5 x 10mm, Zinc Plate

Cover, LED, Yellow

Guide, Thread, Upper, Assembly

Screw, Button Head Cap, M4 x 0.7 x 6mm

Post, Guide

Standoff, M-F, 3/16" Round

Pigtail

Screw, Plastifast, 2-32 x 1/4”

Washer, Flat #2

Clamp, Ribbon Cable, 3.31”

Insulator, Thread Break

33 34 35

Screw, Cheese Head Slotted, M4 x 0.7 x 10mm

Re-inforcement, Self-Adhesive

Bushing, Tensioner

36# 37#

Cable, Ground, Pan, 4.75”

Screw, Pan Head Phillips, w /Star, M4 x 0.7 x 10mm

Note:

The following can be replaced as a factory built assembly:

*007547-01 Tensioner, Thread, Main, Black, Assembly •007530-01 Pretensioner, Assembly #10869 Tensioner, w /Insulator, Assembly (includes 007547-01 and 007530-01)

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

17-1

Arm and Bed

Figure 17

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

17-2

Arm and Bed Item Part

Reference Figure 17

Item

No.

Number

Description

Comments

A 1 2

004504-01S 003539-01 003535-01 005601-01 006576-01 001522-01 003545-01 003546-01 002698-01 003532-01 005332-01 002809-01 001939-01 003531-01 004261-01 008395-01 ------------- 006561-01 001955-14 004267-01 009000-01 -------------- 006579-01 004643-01 010107-01 003533-05 002697-09 002696-15 001926-12 003534-10 002696-08 002697-03 671855-06 761002-11 002610-14 010171-16 001971-06 002637-10 001926-12 702946-30 006560-01 010171-12 10246

Bobbin Idler

See Page 19-1

Counterweight, Phase I Shaft, Bobbin, Phase II Bracket, Needle Plate Bracket, Needle Plate

3a 3b

(Trimmer Only)

(Non-Trimmer Only)

4 5 6 7 8

Pulley, Drive, Bobbin, Bottom, 16T, 1/5P

Cam, Drive, Lever, Take-Up

Screw, Set, Cam

Rod, Crank, 90 Deg

Shaft, Arm

9*

Pulley, Adjustable, Top, 32T, 1/5P

10 11 12 13 14

Belt, Timing, 1/5P, 104 Groove, 3/8" Wide

Rod, Connecting

Plate, Retainer, Bearing, Arm Shaft

Collar, Shaft, Headup Solenoid, Jump Stitch

14a

Nut, Panel

Included in Item #14

15

Bracket, Solenoid

16•

Ring, Retaining, External, .188" Case, Bobbin, wo /Spring Hook, Rotary, Small Bobbin

17 18

18a

Screw, Rotary Hook

Included in Item #18

19

Plate, Needle, Pocketed Plate, Needle, Raised

19a

(not shown)

20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Screw, Needle Plate

Sensor, Under Thread Control, Assembly Ring, Retainer, External, Arm Shaft

Washer, Wave, 35mm OD Bearing, Ball, Radial, 15mm ID

Screw, Flat Head Socket, M4 x 0.7 x 12 Lg Ring, Retaining, External, Bobbin Shaft

Bearing, Ball, Radial, 8mm ID Washer, Wave, 22mm OD

Screw, Pan Head Slotted, M3 x 0.5 x 6 Lg

Thread, Bobbin, White

Pin, Spring, 3mm x 14mm Lg

Screw, Socket Head Cap, M4 x 0.7 x 16mm Screw, Set, Flat Point, M6 UNF x 6mm

Screw, Socket Head Cap, Low Head, M5 x 0.8 x 10mm Screw, Flat Head Socket, M4 x 0.7 x 12mm Spacer, Shaft, .187" ID x .312" OD x .03" Thick

37•

Bracket, Latch

38

Screw, Socket Head Cap, M4 x 0.7 x 12mm, Zinc Plate

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

17-3

Arm and Bed Item Part

Reference Figure 17

Item

No.

Number

Description

Comments

39 40

002668-01 670038-10 002893-21 003622-21 006526-01 010171-10 007257-01 001927-10 007272-10 010170-20 006559-01 002876-21 690427-04 005331-01 006549-03 010170-30 690439-03 011133-01 700134-06 003573-03 10183

Collar, Support, Gear

Screw, Socket Head Cap, 10-32 x 5/8"

41a 41b

Cover, Grabber Cover, Solenoid Bracket, Picker

(Trimmer Only)

(Non-Trimmer Only)

42 43 44 45 46 47

Screw, Socket Head Cap, M4 x 0.7 x 10mm, Zinc Plate

Cam, Trimmer Cam, Trimmer

(#up to s/n 17033)

(#s/n 17034 and above)

Screw, Set, Flat Point, M5 x 0.8 x 10mm Screw, Set, Cone Point, M5 x 0.8 x 10mm

Screw, Socket Head Cap, M3 x 0.5 x 20mm, Zinc Plate

48• 49•

Pin, Latch

Latch, Jump Stitch

50

Washer, Lock, Split, M4 Pulley, Hub, Adjustable

51*

52 53 54 55 56 57

O-Ring, .187" ID x .06" Thick

Screw, Socket Head Cap, M3 x 0.5 x 30mm, ZP (Non-Trimmer Only)

Washer, Flat, M3

(Non-Trimmer Only) (Non-Trimmer Only)

Washer, Shoulder, .75” OD

Spacer, Nylon, .140” ID x .250” OD x .375” (Non-Trimmer Only)

Nut, Nylock, M3

(Non-Trimmer Only)

Note:

The following can be replaced as a factory built assembly:

*005191-01 Pulley, Adjustable, Assembly •007340-01 Bracket, Latch, Jump Stitch, Assembly #These serial numbers are for the head only, not the machine

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

17-4

This page intentionally left blank

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

18-1

Reciprocator

Figure 18

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

18-2

Reciprocator Item Part

Reference Figure 18

Item

No.

Number

Description

Comments

1* 2* 3* 4* 5* 6* 7*

007449-01 007448-01 001865-01 002807-01 001842-01 004676-01 004878-01 671855-06 010171-10 001858-01 001875-01 001955-18 004264-08

Bushing, Cradle, Spring Spring, Jump, Reciprocator Bushing, Shaft, Needle Bar

Stud, Connecting, Reciprocator, Machined

Bracket, Stopper, Steel Bracket, Stopper, Delrin

Reciprocator

8 9

Screw, Pan Head Slotted, M3 x 0.5 x 6mm

Screw, Socket Head Cap, M4 x 0.7 x 10mm, Zinc Plate

10 11 12 13

Shaft, Guide, Needle Bar Bearing, Shaft, Guide

Ring, Retainer, External, 5/16" ID

Screw, Set, Cone Point, M4 x 0.7 x 8mm

Note:

The following can be replaced as a factory built assembly:

*001990-01S Assembly, Reciprocator

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

19-1

Bobbin Idler

Figure 19

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

19-2

Bobbin Idler Item Part

Reference Figure 19

Item

No.

Number

Description

Comments

1 2 3 4 5 6 7 8 9

003593-01 002817-01 002816-06 003668-01 003188-01 660278-01 003543-05 672036-10 690427-05 702876-08 001955-18 690439-05

Roller, Idler

Bar, Idler, Assembly

Spring, Idler

Cover, Head, Rear

Screw, Shoulder, 7mm OD, M5 x 0.8 x 5mm

Stud, Press, 1/4" x 1/2"

Nut, Jam, Hex, M5

Screw, Button Head Cap, M5 x 0.8 x 10mm

Washer, Lock, Split, M5

10 11 12

Spacer, Shaft, 5/16" ID x .016" Thick Ring, Retainer, External, 5/16" ID

Washer, Flat, M5

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

20-1

Take-Up Drive Lever

Figure 20

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

20-2

Take-Up Drive Lever

Reference Figure 20

Item Part

Item

No.

Number

Description

Comments

1* 2* 3•

003567-01 001947-01 004821-01 001983-01 004820-01 001893-01 001894-01 660830-10 003543-05 010171-16 690427-04 690439-04 671855-08 010171-10

Base, Drive, Lever, Take-Up, PHS II Bushing, Base, Drive, Lever, Take-Up

Lever, Drive, Lever, Take-Up

4

Follower, Assembly

5•

Shaft, Drive, Lever, Take-Up

6 7

Case, Gear, Drive, Lever, Take-Up Gear, Drive, Lever, Take-Up Pin, Groove, 1/8" OD x 5/8"

8•

9

Nut, Jam, Hex, M5

10 11 12 13 14

Screw, Socket Head Cap, M4 x 0.7 x 16mm, Zinc Plate

Washer, Lock, Split, M4

Washer, Flat, M4

Screw, Pan Head Slotted, M3 x 0.5 x 8mm

Screw, Socket Head Cap, M4 x 0.7 x 10mm, Zinc Plate

Note:

The following can be replaced as a factory built assembly:

*005362-01 Assembly, Bushing, Take-Up Lever •004768-01 Lever, Drive, Lever, Take-up, Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

21-1

Grabber Blade

Figure 21

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

21-2

Grabber Blade Item Part

Reference Figure 21

Item

No.

Number

Description

Comments

1 2 3 4 5 6 7 8 9

003185-01

Rod, Guide

10156

Guide, Grabber Mount, w /Bearing Arm, Actuator Blade, Grabber Cover, Blade, Front Cover, Blade, Top Bracket, Transition Cover, Blade, Rear

003168-01 003166-01 003586-01 003509-12 003589-02 003590-01 003592-21 001962-03 670406-02 003509-08 010171-10 690439-04 003157-06 003155-01 007139-01 002893-21 003178-01 10157

Screw, Button Head Socket, M4 x 0.7 x 12mm

10 11 12 13 14 15 16 17 18 19 20

Screw, Set, Flat Point, M3 x 0.5 x 3mm Screw, Button Head Cap, 4-40 x 1/8" Screw, Button Head Socket, M4 x 0.7 x 8mm

Screw, Socket Head Cap, M4 x 0.7 x 10mm, Zinc Plate

Washer, Flat, M4

Ring, Retainer, Crescent

Swivel, Wire Collar, Clamp Cover, Grabber

Shaft, Pivot, Grabber

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

22-1

Grabber Motor

Figure 22

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

22-2

Grabber Motor

Reference Figure 22

Item Part

Item

No.

Number

Description

Comments

1*

000363-05 003170-01 282911-01 010451-01 003502-01 003525-01 000465-01 010171-10 690427-04 690439-04 690713-36 670174-10 003504-01 003180-01 003176-01 003156-01 003503-01 011162-08 003537-01 003178-01 003538-01 001960-08 009862-12 670050-03 001960-08

Sprocket, 1/5P, 13T, .562" x .281" Mount, Motor, Grabber, Threaded

2*•

3* 4* 5* 6* 7*

Switch, Limit, Roller

Mount, Motor, Grabber Mount, Limit Switch Bearing, Flange, 6mm

Motor, Grabber

8 9

Screw, Socket Head Cap, M4 x 0.7 x 10mm, Zinc Plate

Washer, Lock, Split, M4

10 11 12

Washer, Flat, M4

Washer, External Star, #6

Screw, Pan Head Phillips, 6-32 x 5/8"

13* 14*

Belt, Timing, 39T, 1/5P Arm, Motor Stop Bumper, Motor Stop Handle, Stop, Motor Sprocket, 1/5P, 20T

15

16* 17*

18

Screw, Button Head Socket, M4 x 0.7 x 8mm, Zinc Plate

19* 20* 21*

Mount, Limit Switch Stop

Shaft, Pivot, Grabber Stop, Limit Switch

22 23 24 25

Screw, Set, Socket Head, M4 x 0.7 x 8mm Screw, Pan Head Phillips, w /Star, M3 x 0.5 x 12mm

Screw, Set, Knurled Cup, 8-32 x 3/16” Screw, Set, Flat Point, M4 x 0.7 x 8mm

Note:

The following can be replaced as a factory built assembly:

*010232-01 Grabber, Motor, Assembly •Non-trimmer machines use item 2 only

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

23-1

Cutter/Picker

Figure 23

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

23-2

Cutter/Picker Item Part

Reference Figure 23

Item

No.

Number

Description

Comments

A 1 2 3 4 5 6 7 8 9

007265-01 010609-01 003679-01 010172-16 690364-32 010355-01 006526-01 003509-08 007443-06 010170-10 003511-01 001955-08 003141-01 005615-01 010170-06 003131-01 001962-03 010188-01 001955-15

Trimmer Drive

See Page 24-1

Link, Connecting

Screw, Shoulder, 4-40 x 1/8" OD x 1/8"

Screw, Socket Head Cap, M5 x 0.8 x 16mm, Zinc Plate

Washer, Flat, #2, .032" Thick

Link, Connecting, Picker

Bracket, Picker

Screw, Button Head Socket, M4 x 0.7 x 8mm Screw, Flat Head Socket, M3 x 0.5 x 6mm

Screw, Socket Head Cap, M3 x 0.5 x 10mm, Zinc Plate

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Mount, Picker

Ring, Retainer, External, .125"

Base, Picker

Picker

Screw, Socket Head Cap, M3 x 0.5 x 6mm, Zinc Plate

Pin, Swivel, Front

Screw, Set, Flat Point, M3 x 0.5 x 3mm Screw, Set, Cone Point, M3 x 0.5 x 6mm

Clip, Retaining, External, .188”

10181 10185 10186 10187

Bracket, Needle Plate

Arm, Drive, Movable Knife

Knife, Movable

Knife, Spring, Fixed

001922-08

Screw, Socket Head Cap, M3 x 0.5 x 8mm

10184

Presser, Under Thread

005098-01 006387-01 004550-01 001926-10 010178-03 008465-01 008467-01 010892-01 003123-03 010170-06 690427-03 690811-34

Spacer, Shaft, .128" ID x .317" OD x .03" Thick

Bracket, Bed, Cable Mount, Cable Tie

Screw, Flat Head Socket, M4 x 0.7 x 10mm

Nut, Hex, M3

Bracket, Spring, Mount

Collar, Picker

Spring, Picker, Front

Screw, Set, Cup Point, M3 x 0.5 x 3mm

Screw, Socket Head Cap, M3 x 0.5 x 6mm, Zinc Plate

Washer, Lock, Split, M3 Washer, Internal Star, #4

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC

24-1

Trimmer Drive

Figure 24

EMT 10/4 Embroidery Peripheral

Melco Embroidery Systems

From the library of: Superior Sewing Machine & Supply LLC

24-2

Trimmer Drive Item Part

Reference Figure 24

Item

No.

Number

Description

Comments

1 2 3 4 5 6 7 8 9

010170-06 690427-03 690439-03 005611-01 007258-01 005661-01 005669-01 001962-06 003627-01 007273-01 -------------- 003686-01 004746-01 007259-01 670174-08 005609-01 010170-14 005661-02 010178-05 007264-01 007262-01 010170-10 001962-03 007255-01 007256-01 001955-15 009202-01

Screw, Socket Head Cap, M3 x 0.5 x 6mm, Zinc Plate

Washer, Lock, Split, M3

Washer, Flat, M3

Bracket, Switch, Adjusting Frame, Movable, Machined Shaft, Roller, Movable Frame

Roller, Movable, Frame

Screw, Set, Flat Point, M3 x 0.5 x 6mm

Clamp, Swivel, Picker

10* 10a

Picker, Solenoid, Assembly

Nut, Panel, Solenoid

(Included with Item 10)

11 12 13 14 15 16 17 18 21 22 23 24 25 26

Spring, Return, Solenoid

Standoff, 10mm Hex, M-F, M5 x 0.8 x 16mm

Bracket, Solenoid, Mounting

Screw, Pan Head Phillips, 6-32 x 1/2"

Plate, Link Adjusting

Screw, Socket Head Cap, M3 x 0.5 x 14mm, Zinc Plate

Shaft, Roller, Movable Frame

Nut, Hex, M5

19* 20*

Switch, Optical, Assembly Solenoid, Trimmer, Assembly

Screw, Socket Head Cap, M3 x 0.5 x 10mm, Zinc Plate

Screw, Set, Flat Point, M3 x 0.5 x 3mm

Mount, Solenoid, Trimmer Bolt, Adjuster, Trimmer

Ring, Retaining, External, .188"

Spring, Trimmer Home

Note:

The following can be replaced as a factory built assembly:

*007261-01 Trimmer, Picker, Solenoid, Opto, Assembly

110278-01, Rev. E

Illustrated Parts Manual

From the library of: Superior Sewing Machine & Supply LLC