Melco EMT 10-6T

26-4

X-Beam Assembly (1, 2, and 3 of 3) Part Number Qty Description

10678 10684 10687 10694 10695 10957 10960 11568 12173 12188 12189 12190 12191 12465 12466 12619

1 1 1 1 1 6 2 1 1 2 1 1 3 1 1 1 2 2 1 3

Motor, Servo, X-Drive Shaft, X-Drive, AT5, 12T

Clamp, Top, X-Belt

Shaft, Tensioner, X-Belt Roller, Tensioner, X-Belt

Damper, Angle Brkt, X-Drive Bearing, Shell, Needle, 10MM

Shim, Bracket, X-Home Clamp, Looming, Cable Bracket, Angle, X-Drive

Hardstop, X-Drive, 12MM Rail Nutstrip, Hardstop, 12MM Nutstrip, Linear Rail, 12MM

Tiewrap, Wire Routing, Snap Fit, 0.187 in. Diameter Tiewrap, Wire Routing, Snap Fit, 0.750 in. Diameter

Angle, Drive, X-Drive Washer, Wave, 32MM

002697-08 007562-11 009311-03 009464-01 010170-10 010170-12 010171-14 010171-20 010172-12 010172-16 010173-16 10435-03 10435-05 10435-06 10436-03 10440-04 10528-02 10581-03 10679-02 10681-01

Ring, Retainer, External, 11MM

Ferrite, Split, .4 in. ID

Bearing, Linear

99 27

Screw, M3 x 0.5 x 10mm Socket Head Cap, Zinc Plate Screw, M3 x 0.5 x 12mm Socket Head Cap, Zinc Plate Screw, M4 x 0.7 x 14mm Socket Head Cap, Zinc Plate Screw, M4 x 0.7 x 20mm Socket Head Cap, Zinc Plate Screw, M4 x 0.8 x 12mm Socket Head Cap, Zinc Plate Screw, M5 x 0.8 x 16mm Socket Head Cap, Zinc Plate Screw, M6 x 16mm, Socket Head Cap, Zinc Plate

3 2

14 27

4

26

Washer, Fender, 3.2 x 9 x .8mm Washer, Fender, 4.3 x 12 x 1mm Washer, Fender, 5.3 x 15 x 1.2mm

3

37

2 1 1 1 1 1

Bearing, Radial, Shielded, 15 ID x 32 OD x 9W

Ring, Retaining, Internal, 20.6 ID x 1.2

Y-Beam, Machined X-Beam, Machined

Pulley, AT5, 12T, X-Motor

Belt, Continuous, AT5, 16mm, 56T

12159, Rev. A Please refer to the SPECIAL INSTRUCTIONS section in the Introduction of this manual for information regarding the meaning of the Bold and Italicized , part number, as well as the asterisk (*) and pound (#) signs found throughout this manual. From the library of: Superior Sewing Machine & Supply LLC Illustrated Parts Manual