Mitsubishi PLK-E1010 Instruction Manual

3-13 Installation of the thread stand (1) Assemble the thread stand with the instructions enclosed in the packing. (2) Fit the thread stand (NO.1) in the thread stand hole on the tabletop. (3) Fix the thread stand (NO.1) firmly from the rear side of the table with tightening the nut (NO.4) and the washers (NO.2, 3).

1

2

3

4

3-14 Functioning the work holder pedal (1) Connect the chain (NO.1) across the lever (NO.2) located at the left side of the sewing machine head and the work holder pedal mounted on the steel stand bottom beam. The chain (NO.1) is enclosed in the accessory box. (2) Put the stepping motor cover (NO.4) back on the sewing machine head with the screw (NO.5) after the chain (NO.1) connection.

5

2

4

1

3

9

From the library of Superior Sewing Machine & Supply LLC • www.supsew.com