Racing MCA18Z-19

THE MANUAL OF THE CONTR0L PANEL

5

6

3

8 9

10

13

2

4

12

14

1

11

7

5

5

6

9

6

3

8

0 1

3 4

2

4

2

1

7

POWER 電源

P20

MODEL

SECTION

模式 MODE

送料 FEED

STITCH

COUNTER

針數

計針數

工程

MANU AUTO

MOTOR

STITCH

START

AUTO

MANU

SET

馬達送料 SEND

開始

SET

自 動

手 動

載入針數

設定

MOTORSTOP 馬達停止 PRE TENSION 換段修正

FUNC TION 功能

END

結束

L R

15

16

The instruction of the control box

1 Start (Circulating Switch) : Return to the status of the beginning.

2 Set (Circulating Switch) : Enter to the modified status.

1 3 Section : ▋、A、C and D can be setting the section from 1~18.

2 E~Z can be setting the section from 1~9.

4 End : Press this key to complete the setting transaction.

5 Feed : To set the distance of each stitch when feeding From 00-99.

(00=0mm.For each additional one=0.025MM.)

6 Data Panel : Indicate the data status.

7 Stitch : To set the stitches from 000~999 for the need section.

8 Manual : During the manual condition, using the manual botton to enter the next section.

9 Auto : When the stitch are executed, the machine will automatic progress in to the next section.

10 Stitch : After Complete the sewing test, press this key to duplicate the testing result of

stitches to enter the setting of the next stitches section.

11 Mode : Use this key can memory up to 27 different sections of the information from ▋, Ａ~Ｚ.

(For the detail,please refer to the functional guide in page 4~6.)

12 Power : Unable to operate unless this indicate lights is on. (Switch is on the power box.)

13 Motor send : Press this key to start the motor for easily insert the elastic tape.

14 Motor stop : During the Start lamp is lighting, press this key to stop the motor.(To check the RPM

figure, press the Pre.Tension function key after press the motor stop.)

Pre. Tension : During the Set lamp is lighting, press this key to set the Pre. Tension.

(For the detail,please refer to the function guide in page 14,15.)

15 Function : Press this key to set the functional for all sewing type.(Please refer to the

functional guide in page 4~6.)

16 : Press this key to trim during each sections. (For example: When sewing the

L R

both side of the under pants.Please refer to the operating guide on page 12~13.)

3