Reece 32

A2

WELTING MATERIAL

BACKING PATCH

_['__ :s_

WELTING PATCH

· GARMENT \

BACKING PATCH(Pellon) * Backing Patch length is the same as Welting Patch, one inch longer than the welt. For double welting use patches with 1/ 4 of an inch end slits. For single welting and knits, use patches without end slits.

Welting material consists of Welting Patch (gar– ment material), Backing Patch (Pel Ion L-35) and Stoy Material (cotton Silesia). For widths of welt– ing material, refer to chart on Page A3. WELTING PATCH-(Garment Material) Welting patch length is one inch longer t~an actual welt. To produce the best effect, patches for horizontal welts should be cut crosswise to selvage except where stripes in the material ore over 1/4 of an inch in width. For vertical or diagonai welts, patches should be cut parallel to the selvage.

SLIT

SLIT

LENGTH - l" • Length of Welt * Pellon L-35 b~ck ing material is recommended. This material may be cut in your own plant or may be pbtoined precut from the Pel Ion Corp., N.Y ., N. Y. Specify Reece Welting black or white, length, width and with or without end-slits.

j ~ LENGTH =I" , Length of Welt »-I

From the Library of Superior Sewing Machine & Supply LLC