Strobel 141-23 Instruction Manual

STROBEL

Needle position {with stop outside the seam with pedal position 11 2" fig. 4)): The needle position must be set in such a way, that the distance between the outer table edge in the stitch direction and the tip of the needle is about 10 mm. Needle position is position 2 at the sewing drive. fig. 4

o needle position _Q I

needle

Needle position {with stop in and outside the seam with pedal position "0" {fig. 5)): The needle position must be set in such a way, that the distance between the tip of the needle in the stitch direction and outer table edge is about 4 mm. Needle position is position 1 at the sewing drive. fig. 5

osition 1

needle

13 From the library of: Superior Sewing Machine & Supply LLC